Index

$#! · 0-9 · A · B · C · D · E · F · G · H · I · J · K · L · M · N · O · P · Q · R · S · T · U · V · W · X · Y · Z

V
	value uvm_reg_field uvm_reg_item
	Variables Global uvm_built_in_pair#(T1,T2)uvm_class_pair#(T1,T2)uvm_comparer uvm_hdl_path_concat uvm_line_printer uvm_mem_access_seq uvm_mem_mam_cfg uvm_mem_mam_policy uvm_mem_shared_access_seq uvm_mem_single_access_seq uvm_mem_single_walk_seq uvm_mem_walk_seq uvm_packer uvm_printer_knobs uvm_recorder uvm_reg_access_seq uvm_reg_bit_bash_seq uvm_reg_bus_op uvm_reg_frontdoor uvm_reg_hw_reset_seq uvm_reg_item uvm_reg_mem_built_in_seq uvm_reg_mem_hdl_paths_seq uvm_reg_mem_shared_access_seq uvm_reg_predictor uvm_reg_shared_access_seq uvm_reg_single_access_seq uvm_reg_single_bit_bash_seq uvm_report_server uvm_root uvm_sequencer#(REQ,RSP)uvm_table_printer uvm_transaction uvm_tree_printer
	verbosity uvm_comparer
	Virtual Register Field Classes
	Virtual Registers
W
	wait_for uvm_barrier uvm_objection
	wait_for_change uvm_reg_backdoor
	wait_for_grant uvm_sequence_base uvm_sequencer_base
	wait_for_item_done uvm_sequence_base uvm_sequencer_base
	wait_for_relevant uvm_sequence_base
	wait_for_sequence_state uvm_sequence_base
	wait_for_sequences uvm_sequencer_base uvm_sqr_if_base#(REQ,RSP)
	wait_for_state uvm_phase
	wait_modified uvm_config_db uvm_resource_base
	wait_off uvm_event
	wait_on uvm_event
	wait_ptrigger uvm_event
	wait_ptrigger_data uvm_event
	wait_trigger uvm_event
	wait_trigger_data uvm_event
	What users should do as soon as possible
	Why is this necessary uvm_tlm_time
	Why uvm_object constructors are now mandatory
	write uvm_analysis_port uvm_mem uvm_mem_region uvm_reg uvm_reg_backdoor uvm_reg_field uvm_reg_fifo uvm_resource#(T)uvm_subscriber uvm_tlm_if_base#(T1,T2)uvm_vreg uvm_vreg_field
	write_by_name uvm_resource_db
	write_by_type uvm_resource_db
	write_mem uvm_reg_sequence
	write_mem_by_name uvm_reg_block
	write_reg uvm_reg_sequence
	write_reg_by_name uvm_reg_block

rand uvm_reg_data_t value

Mirrored field value.

rand uvm_reg_data_t value[]

The value to write to, or after completion, the value read from the DUT.

int unsigned verbosity = UVM_LOW

Sets the verbosity for printed messages.

This section defines the virtual field and callback classes.

A virtual register is a collection of fields, overlaid on top of a memory, usually in an array.

virtual task wait_for()

Waits for enough processes to reach the barrier before continuing.

task wait_for( uvm_objection_event objt_event,
uvm_object obj = null )

Waits for the raised, dropped, or all_dropped event to occur in the given obj.

virtual local task wait_for_change( uvm_object element )

Wait for a change in the value of the register or memory element in the DUT.

virtual task wait_for_grant( int item_priority = -1,
bit lock_request = 0 )

This task issues a request to the current sequencer.

virtual task wait_for_grant( uvm_sequence_base sequence_ptr,
int item_priority = -1,
bit lock_request = 0 )

This task issues a request for the specified sequence.

virtual task wait_for_item_done( int transaction_id = -1 )

A sequence may optionally call wait_for_item_done.

virtual task wait_for_item_done( uvm_sequence_base sequence_ptr,
int transaction_id )

A sequence may optionally call wait_for_item_done.

virtual task wait_for_relevant()

This method is called by the sequencer when all available sequences are not relevant.

task wait_for_sequence_state( uvm_sequence_state_enum state )

Waits until the sequence reaches the given state.

virtual task wait_for_sequences()

Waits for a sequence to have a new item available.

virtual task wait_for_sequences()

Waits for a sequence to have a new item available.

task wait_for_state( uvm_phase_state state,
uvm_wait_op op = UVM_EQ )

Wait until this phase compares with the given state and op operand.

static task wait_modified( uvm_component cntxt,
string inst_name,
string field_name )

Wait for a configuration setting to be set for field_name in cntxt and inst_name.

task wait_modified()

This task blocks until the resource has been modified -- that is, a uvm_resource#(T)::write operation has been performed.

virtual task wait_off ( bit delta = )

If the event has already triggered and is “on”, this task waits for the event to be turned “off” via a call to reset.

virtual task wait_on ( bit delta = )

Waits for the event to be activated for the first time.

virtual task wait_ptrigger ()

Waits for a persistent trigger of the event.

virtual task wait_ptrigger_data ( output uvm_object data )

This method calls wait_ptrigger followed by get_trigger_data.

virtual task wait_trigger ()

Waits for the event to be triggered.

virtual task wait_trigger_data ( output uvm_object data )

This method calls wait_trigger followed by get_trigger_data.

In UVM 1.1a, the behavior of the UVM object factory retains its previous (if incorrect) behavior by default.

Integers are not sufficient, on their own, to represent time without any ambiguity: you need to know the scale of that integer value.

The UVM recommends that the following constructor be specified for any class extended from uvm_object:

function void write ( input T t )

Send specified value to all connected interface

virtual task write( output uvm_status_e status,
input uvm_reg_addr_t offset,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the specified value in a memory location

task write( output uvm_status_e status,
input uvm_reg_addr_t offset,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write to a memory location in the region.

virtual task write( output uvm_status_e status,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the specified value in this register

virtual task write( uvm_reg_item rw )

User-defined backdoor write operation.

virtual task write ( output uvm_status_e status,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the specified value in this field

Pushes the given value to the DUT FIFO.

function void write( T t,
uvm_object accessor = null )

Modify the object stored in this resource container.

pure virtual function void write( T t )

A pure virtual method that must be defined in each subclass.

virtual function void write( input T1 t )

Broadcasts a user-defined transaction of type T to any number of listeners.

virtual task write( input longint unsigned idx,
output uvm_status_e status,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the specified value in a virtual register

virtual task write( input longint unsigned idx,
output uvm_status_e status,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the specified value in a virtual field

static function bit write_by_name( input string scope,
input string name,
T val,
input uvm_object accessor = null )

write a val into the resources database.

static function bit write_by_type( input string scope,
input T val,
input uvm_object accessor = null )

write a val into the resources database.

virtual task write_mem( input uvm_mem mem,
output uvm_status_e status,
input uvm_reg_addr_t offset,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Writes the given memory mem using uvm_mem::write, supplying ‘this’ as the parent argument.

virtual task write_mem_by_name( output uvm_status_e status,
input string name,
input uvm_reg_addr_t offset,
input uvm_reg_data_t data,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the named memory

virtual task write_reg( input uvm_reg rg,
output uvm_status_e status,
input uvm_reg_data_t value,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Writes the given register rg using uvm_reg::write, supplying ‘this’ as the parent argument.

virtual task write_reg_by_name( output uvm_status_e status,
input string name,
input uvm_reg_data_t data,
input uvm_path_e path = UVM_DEFAULT_PATH,
input uvm_reg_map map = null,
input uvm_sequence_base parent = null,
input int prior = -1,
input uvm_object extension = null,
input string fname = "",
input int lineno = 0 )

Write the named register